Devolo dLAN 85 HSplus Service Manual download pdf (Page 13)

Initial use

devolo dLAN 85 HSplus

2.3.2 Ports

 Network connection

This is the connection point on the dLAN 85 HSplus for connecting it to a

computer or another network device with the network cable (included).

 Integrated electrical socket

If you connect additional network devices using a multiple socket, plug this

multiple socket into the electrical socket of the dLAN

85 HSplus. The inte-

grated mains filter eliminates any noise of connected devices and signifi-

cantly improves data transmission in the home network.

Please note that all dLAN devices to be connected to your network are also con-

nected to your household electrical wiring. A dLAN device switches to standby

mode after a short while if no active network device such as a computer is con

nected to the network port. In standby mode, the dLAN device cannot be

accessed via the power supply grid. As soon as the network device (e.g. compu

ter) connected to the network interface is switched on again, your dLAN device

can also be reached again via the electrical wiring.

2.4 Connecting the dLAN 85 HSplus

This section describes how to connect your dLAN 85 HSplus to a computer or to

a network.

The firmware updater application can be found in the download section of our

website at www.devolo.com.

햲 Use the included network cable to connect the dLAN 85 HSplus to the net-

work port of your running computer or other network device.

햳 Plug the dLAN 85 HSplus into a wall socket.

햴 Additional network devices that are connected via a multiple socket are con-

nected to the mains power supply by plugging the multiple socket into the

integrated electrical socket of the dLAN

85 HSplus.

햵 Once you have connected at least two dLAN 85 HSplus adapters as

described in 햲 and 햳, your dLAN

85 HSplus network has been set up. To

protect your dLAN network individually from unauthorised access, you

should first write down the security IDs of the dLAN devices. This unique

identifier of each dLAN device is located on the label on the housing. Then,

continue with the configuration of your network as described in Chapter 3,

Security in the dLAN'.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

No comments

Devolo dLAN 85 HSplus Service Manual Page 13