Devolo 200 AV Installation Guide download pdf (Page 15)

14 Initial use

devolo dLAN 200 AV USB extender

If not already detected by your operat-

ing system, install the relevant driver

for your USB device in accordance with

the respective manufacturer's instruc-

tions.

햴 After you have successfully installed the complete

software, continue by installing the

dLAN 200 AV USB extender hardware. (see 3.5

Connecting the dLAN 200 AV USB extender)

3.5 Connecting the

dLAN 200 AV USB extender

This section describes how to connect your

dLAN 200 AV USB extender to a USB device in your

dLAN 200 AV network.

The dLAN 200 AV USB extender is in-

tended for connection to devices such

as (multifunctional) printers or hard

drives. The adapter only ever supports

one USB device.

햲 Connect the dLAN 200 AV USB extender to the

USB device to be connected within your dLAN 200

AV network using a USB cable at the USB port.

햳 Plug the dLAN200AVUSBextender into an

available power outlet.

When connecting an external USB hard

drive, delayed hardware detection may

occur depending on the manufacturer,

due to the automatic hard drive test.

This may take a few minutes.

햴 Once you have connected a

dLAN 200 AV USB extender and another devolo

dLAN 200 AV adapter, your dLAN 200 AV net-

work has been set up.

You can find information on the respective

devolo dLAN 200 AV adapter on our website

www.devolo.com

In chapter 4 dLAN network you can find out

쑗 how to protect your dLAN 200 AV net-

work individually and

쑗 how to control access to the USB devices

connected via the

dLAN 200 AV USB extender.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

Comments to this Manuals

No comments

Devolo 200 AV Installation Guide Page 15

Comments to this Manuals

Related products and manuals for Networking cards Devolo 200 AV